Zamboni 

ICE RESURFACERS
 
       
Propane or Natural Gas
* 65 HP @ 2,500 rpm

* 3.0 Litre GM Engine

* Hydrostatic transmission with built-in "fall off" operator safety system

* Hands-free mechanical engine governor

* Hydraulic Board Brush

* Four Wheel Drive

* Dana-Spicer Axles 4,300 Lbs Front, 4,800 Lbs Rear Provides full power & speed to the augers at all times, even in corners

* Full hydro - dynamic braking

15 Foot Turning Radius

The tightest turning radius in the industry!

   
  
* Transmission -Continuosly variable hydrostatic pump and motor are axial piston type.

* 3.0 Litre GM Engine,  65 HP @ 2,500 rpm

* Powerful double hydraulic pump for the vertical and horizontal augers delivers strong conveyor performance

* Hydraulic Board Brush

* Wash Water System

* Four Wheel Drive


* Rugged Dana-Spicer Axles
   4,300 Lbs Front, 6,200 Lbs Rear

* Rust free polyethylene ice making water tank with easy access cover

16 Foot Turning Radius
Propane or Natural Gas
 
 
   
         
552 Electric
Electric Controls: Sevcon PowerPak® controls have been proven in applications throughout the world.  Improved drive and control functions from MOSFET technology. 

On board diagnostics provide:

* Enhanced troubleshooting capability with fault and service logs

* Vehicle management functions including Battery Discharge Indicator (BDI), machine “real-time” status and testing via optional handset calibrator.

* Motor brush wear sensors

Batteries -

*510 A/H - Standard. Capable of handling most single pad facilities schedules on a single charge. Microprocessor controlled chargers for enhanced battery life. 

* 600 A/H - Optional.  Extends the machine's resurfacing performance
   

 
         
"New"  Zamboni 560AC Electric

Zamboni Model 560AC provides energy efficiency

without compromise of performance.

The PLUS+1™ dash display enables operators to monitor the resurfacing in progress and make adjustments on demand. Zamboni’s new 1-Touch mode uses customizable settings for auger speeds, electronic water valves and blade control for improved ease of operation and a more consistent ice surface.

The 560AC is the electric solution with the power to
meet the needs of today’s busy arena surfaces. The AC motors/controls and load sensing hydraulic system increase efficiency providing more resurfacings per charge. The design of the 560AC integrates state-of-the-art technology with standard features including an automatic snow breaker, hydraulically actuated snow tank lid, and the Zamboni Advanced Water System (AWS™) resulting in a simplified resurfacing process and a superior sheet of ice.

The 560AC is the new standard for emission-free
 reliability with unparalleled power.

  Streamlined conditioner design with internal-drive horizontal auger provides additional maneuverability.

 Electric water valves and blade control eliminate control rods and blade wheel.

Hydraulically actuated wash water pump relocated for easier service access.

Replaceable poly runners serve as protective wear strips for the sides of the conditioner.

POWER EDGERS
               
(Gas or Propane)
  • Powerful 10.5 HP engine
  • Wide 18" cut includes 8 sided cutters
  • Contoured snow chute
  • Adjustable board guide
  • Heavy-duty steel plate body and runners
  • Permanently mounted large rubber wheels
  • Engine and depth controls on handle near operator
  • Weight - 68 kgs (Gas), 90 kgs (Propane)

ELECTRIC POWER EDGER
               

Rechargeable power edger features:
 * 36 volt, 100 Amp continuous electrical  system with a powerful 6.5 HP (4.8 kW) at 36 volt electric motor.
* Wide 14" cut includes (8) side cutters that
last longer and reduce replacement time & cost.

* Contoured snow chute directs snow to center
of ice - not on the boards or operator. Replaceable board guide standard.

* Heavy - duty  steel plate body and runners provide stable "wander - free" control. Baked on powder paint & zinc electroplating is used throughout for corrosion protection.  Powered  by (3) 12 volt batteries for zero emissions and quiet operation.

* Motor & depth controls are located on the handle near the operator.
 
* Plastic bushings and spherical bearings ensure trouble free operation.

Weight 250 pounds (Including batteries).
      

 





ICE  RESURFACER  AUTOMATIC  WATER  FILLING  SYSTEM




Overflowing  ice  resurfacer  water  tanks  are  eliminated  with  our  patented  fill control system. The control consists of a remote sensor mounted on the resurfacer, a solenoid valve  and  a  control  unit.  When  the  resurfacing  tank is full and starts to overflow,  the sensor  detects  it  and  sends  a  radio signal to the control unit which then shuts off the hot  water  valve.  The  system  is  automatic. You do
not need to pay someone to stand  there  and  watch  the  resurfacer  tank  fill  up.  Ice cut scheduling
is  also  simplified with  the  time  delay  fill.  Just program  the  fill control like an alarm clock for a set time (e.g. 11:30 am)  or  an  interval  (e.g.  90  minutes),  put the hose in the filler, hit the start switch & and  forget  it.  At  the  programmed  time,  the  control  will  fill  the resurfacer  tank and  shut  itself off
when  the  tank  is  full.

Other features include:
. 2 line Alphanumeric display- gives time, status or instructions
. Audible and visible alarms
. Adjustable backup safety timer
. Microprocessor controlled (some features are programable)
. Last fills history recall (used by rink managers to check on past ice surface cut times)
. Low voltage controls for electrical safety
. Easy to operate
. 6 months labour & parts warranty
. Self installation (typically under 2 hours)
. Multiple resurfacer  filling or Multiple filling stations** with multiple resurfacers

Models:
FIL-CT-3C-BRA                      Basic Resurfacer Filling System  
FIL-CT-3C-TEM-BRA              Filling System with Tank Temperature Display Monitoring 
FIL-CT-3C-LEV-BRA              Filling System with Level Sensor & Fill to Level Feature  
FIL-CT-3C-TEM-LEV-BRA      Filling System with Tank Temperature Display Monitoring,     
                                             Level Sensor & Fill to Level Feature